Installing The Front Cover On A Stand-Alone 8203-E4A, 8204-E8A, 8261-E4S, 9407-M15, 9408-M25, Or 9409-M50 - IBM 8203-E4A Manual

Figure 28. Remove the door from the model
4. Gently pull the cover up and off the base.
Installing the front cover on a stand-alone 8203-E4A, 8204-E8A,
8261-E4S, 9407-M15, 9408-M25, or 9409-M50
Use this procedure to install the cover after accessing components or performing service.
1. Place the two lower cover-locking tabs into the retaining slots located on the base of the system unit
as shown in the following figure.
39
Chapter 3. Common procedures for installable features