Using The Rack-Mounted Keyboard And Monitor To Access The Purepower Integrated Manager User Interface - IBM PurePower System Installing

Using the rack-mounted keyboard and monitor to access the
PurePower Integrated Manager user interface
After you have cabled the power cords and verified that the system LEDs are green and blinking, use the
PurePower Integrated Manager user interface to ensure that your components are present and configured.
Note: If you ordered IBM Systems Lab Services startup services, do not perform these steps. IBM
Systems Lab Services performs these steps as part of the startup services while training your personnel.
To use the PurePower Integrated Manager UI to ensure that your components are present and configured,
do the following:
1. Power on the management nodes by pressing the buttons on the right side of the node chassis.
2. Wait 5 minutes for the management nodes to power on.
3. Slide out the console display and keyboard. Lift the display to access the keyboard.
4. The display powers on.
5. Press the PRTSC key to enable the KVM switch. The management nodes are displayed.
6. Press Enter.
7. Log in to the KVM console. The default user ID is admin and the password is PASSW0RD for the KVM
hypervisor operating system (192.168.93.44).
To change the default ID and password, select Applications > System Tools > Settings > Users and
change the required fields.
Note:
To change the password for the PurePower Integrated Manager operating system (puremgrvm),
complete the following steps:
a. From the Red Hat Enterprise Linux (RHEL) KVM operating system desktop, select Applications
> Utilities > Terminal.
b. From the terminal session, run the following command: ssh admin@192.168.93.46 PASSW0RD
c. From the puremgrvm operating system, run the following command: passwd
Note: You will be prompted for the new password and confirmation.
d. Exit the terminal session and return to console login screen. You can now log on by using the
new password.
8. Double-click the PurePower Integrated Manager icon to start the PurePower Integrated Manager
user interface.
9. Log in to the PurePower Integrated Manager user interface.
Note: The default ID and password is admin/PASSW0RD.
10. The PurePower Integrated Manager Home window opens.
11. In the left-hand navigation area, click the Hardware Inventory icon. The Hardware Inventory screen
displays information about hardware resources.
12. Check the Nagios interface to ensure that the components of the system are functioning properly. To
access Nagios, complete the following steps:
a. Click Home.
b. From the PurePower Integrated Manager Home screen, click puremgra. The Nagios Core
manager window opens.
c. Log in to Nagios Core manager.
Note: The default ID and password is nagiosadmin/PASSW0RD.
14
Power Systems: Installing your IBM PurePower System