Using the Remote Control Unit (optional)
You can switch the Drive mode to Remote Control mode and take
pictures using the remote control unit E or F (optional).
Taking Pictures Using the Remote Control
1
Press the four-way controller (2)
in Capture mode to display
on the LCD monitor.
The self-timer lamp blinks slowly and the
camera is ready to take the picture.
2
Press the shutter release button
on the remote control unit.
i The self-timer lamp blinks quickly and the picture is taken after
approximately three seconds.
h The picture is taken immediately.
Focusing may be compromised if you move the camera while the
self-timer lamp is blinking.
1
or h
i
4
112
112
112
5/24/2005
5/24/2005
5/24/2005
12:00
12:00
12:00
65