Table of Contents
Advertisement
Problem
Subject is not in
Subject difficult to focus
focus
on
Subject is not in focusing
area
Subject is too close
Focus mode is set on q
(Macro) or r (Super
Macro)
Flash mode is set to Off Set to Auto or b. (p.75)
Flash does not
discharge
The Capture mode is set
to C, Continuous
Shooting, Infinity-
Landscape or
mode) mode
Very occasionally, static electricity may cause malfunction of the
camera. In this case, remove the battery and install it again. If the
camera works properly, the camera is in its normal condition and you can
continue to use it.
Cause
Subjects difficult to focus on using
autofocus: objects with little contrast (blue
sky, white walls, etc.), dark objects, finely
patterned objects, fast-moving objects,
scenery through window or net, etc. Lock
focus on another object located at same
distance (press shutter release button
halfway), then aim at target and press
shutter release button fully, or use Manual
Focus mode.
Position subject in focus frame (focusing
area) in middle of LCD monitor. If the
subject is outside the focusing area, aim
the camera at the subject and lock the
focus (press shutter release button
halfway), then compose picture and press
the shutter release button fully.
Set focus mode on q (Macro) or r
(Super Macro). (p.72)
Normal pictures will be out of focus if
taken with focus mode set on q (Macro)
or r (Super Macro).
Flash will not discharge in these modes.
You can cancel the non-flash setting for
(Sports
Remedy
(Sports mode).
8
157
Hide quick links:
Advertisement
Table of Contents
