Rerecording (Tape Duplication) - Philips DVDR600VR/37B Owner's Manual

E9480UD_EN.qx3 05.1.8

72 Rerecording (Tape Duplication)

These instructions show you how to copy videotapes.The illustration uses two Recorders. Other VCRs or Camcorders may
operate differently.
1. Audio cables from AUDIO OUT jacks (red and white) of
Recorder 1 to AUDIO IN jacks of Recorder 2
Recorder 1
Playing unit
Recorder 2
Recording unit
1
Make the connections shown above.
2
Recorder 1 will play your tape. Put a prerecorded tape into the
cassette compartment of Recorder 1. Press VCR to put the
unit in VCR mode if necessary.
3
Recorder 2 will record your tape. Insert a blank tape in the
cassette compartment of Recorder 2. Press VCR to put the
unit in VCR mode if necessary.
4
Turn on the TV and set it to channel 03.
instead, see page 10.)
5
Point the remote control at Recorder 2. Press CHANNEL
K K / L L to select EXT2 or CAM1. (See Helpful Hints at right.)
6
Press REC MODE to select SP or SLP as the tape recording
speed at Recorder 2.
7
Press RECORD
press PLAY B (VCR) on the front of Recorder 1.
To stop recording, press STOP C / EJECT A (VCR) on Recorder 1,
then press STOP C / EJECT A (VCR) on Recorder 2.
4:16 PM Page 72
2. Video cable from yellow
VIDEO OUT jack of
Recorder 1 to VIDEO IN
jack of Recorder 2
(To use channel 04
I (VCR) on the front of Recorder 2 then
3. RF coaxial cable from the ANTENNA
OUT jack of Recorder 2 to the TV's
ANTENNA IN jack
Helpful Hints
• If you use the AUDIO and VIDEO
IN jacks on the back of Recorder
2, press CHANNEL K / L to
select EXT2 at step 5. EXT2 will
appear on the TV screen.
• If you use the AUDIO and VIDEO
In jacks on the front of Recorder
2, press CHANNEL K / L to
select CAM1 at step 5. CAM1
will appear on the TV screen.
• Unauthorized recording of
copyrighted television programs,
video tapes, or other materials
may infringe on the rights of
copyright owners and violate
copyright laws.
• If a program has copyright
protection, it may not record
clearly.