Quick Videotape Playback - Philips DVDR600VR/37B Owner's Manual

E9480UD_EN.qx3 05.1.8

20 Quick Videotape Playback

Read and follow the steps below to play a videotape.
1
Turn on the TV. Set it to channel 3 or 4 or its AUDIO/VIDEO
IN channel. This depends on how you connected the Recorder to a
TV. See pages 10-14.
2
With the Recorder power off, insert a videotape in the
cassette compartment of the Recorder.
on the front of the Recorder.
If the power is already on, press VCR to put the Recorder in VCR
mode.The VCR light will appear on the front of the Recorder.
3
Press PLAY
B.
4
Press STOP C to stop playback.
5
Press H to rewind the videotape.
6
After the videotape stops, press OPEN/CLOSE/EJECT
remove the videotape.
4:15 PM Page 20
The VCR light will appear
1
Turn on the TV.
Insert a videotape in the
2
cassette compartment.
1
4
7
VCR Plus +/TIMER
VCR
DISC
A to
MENU
3
SELECT
5
VCR REC
MODE PLAY MODE
REC
FSS
VOLUME
• You must connect the Recorder
to a TV using the RF coaxial
cable or composite video in
order to use the VCR features.
These hookups are explained on
pages 10 and 14.
• If you are using the S-VIDEO or
COMPONENT VIDEO OUTPUT
to view videotape, please DO
NOT use the DVD module.This
will affect optimum playback
quality.
STANDBY-ON
6
OPEN/CLOSE
2 3
EJECT
TV/VIDEO
5 6
8 9
MONITOR CHANNEL
0
CLEAR DVD
SYSTEM
MENU
OK
RETURN
4
PLAY
STOP DVD REC
AUDIO PAUSE
T/C DISPLAY SLOW
MUTE MODE
SEARCH
TV
Helpful Hint