Editing: Disc Information Screen 53 - Philips DVDR600VR/37B Owner's Manual

Digital video disc recorder & video cassette recorder

Hide thumbs Also See for DVDR600VR/37B:

Quick use manual (2 pages)

Table Of Contents

Table of Contents

E9480UD_EN.qx3

05.1.8

You can change Disc settings for a DVD+RW/DVD+R from the Disc

Information Screen.

●

Before you begin, make sure the Recorder is in DVD mode. Press DVD so

the DVD light appears on the front of the Recorder.

When in the Index Picture Screen, press STOP

the first Title on the DVD+RW/DVD+R.

Press

K to enter the Disc Information Screen.

In the Disc Information Screen, press

Settings menu.

Settings for XXXXXX

s L 0 1 D isc name

Protection

Erase disc

Make edits compatible

DVD+RW example

Press

K or L to select Disc name, Protection, Erase disc

(DVD+RW only), Make edits compatible (DVD+RW only),

or Finalize disc (DVD+R only). Proceed as follows,

depending on which feature you want to adjust.

●

Disc name (DVD+RW and DVD+R)

Press B. Press s or B to choose the character position,

then press K or L to enter a character. Press SELECT to

alternate between capital and lower case characters. Press CLEAR

to erase a character (the space will remain). Repeat this process

until you enter the complete name. To save the name, press OK.

"Storing name" will appear briefly.

●

Protection (DVD+RW and DVD+R)

Press B. Press K or L to select Protected or Unprotected,

then press OK. If you protect the Disc, you cannot make any

further changes to the Disc, including recording. "Disc locked" will

appear on the TV screen briefly if you attempt recording. Choosing

Protected also disables most editing features.

To edit or record again, select Unprotected.

Remember, protecting a DVD+R is not the same as finalizing it.

Finalization cannot be undone.

●

Erase disc (DVD+RW only)

Press OK. "This will erase all titles Press OK to confirm" will

appear. Press OK again to begin erasing. (If you decide not to

erase the Disc, press s.) "Erasing disc" appears until erasing is

complete.When the Disc is erased, the Index Picture Screen will

reappear, showing the free space on the Disc.

●

Make edits compatible (DVD+RW only)

Press OK. "This will take XX" and "Press OK to confirm" will

appear to indicate how long the action will take.

Press OK again. "Working .." and a progress percentage bar will

appear until the action is complete.The Index Picture Screen will

reappear when the process is complete.

●

Finalize Disc (DVD+R only, if not finalized already)

Press OK. "Finalizing" will appear until finalization is complete.This

may take a few minutes.Then, the Index Picture Screen will reappear.

You cannot unfinalize a DVD+R, and you cannot record or

edit the DVD+R after you finalize it.

A DVD+R will play on other DVD Players only after the Disc is

finalized.

If necessary, press

to the Disc Information Screen.

4:16 PM

Page 53

B to enter the

B sample

Unprotected

s when you are finished and want to return