Still Picture/Frame-By-Frame Play, Sound 39 - Philips DVDR600VR/37B Owner's Manual

E9480UD_EN.qx3 05.1.8
Still Picture/Frame-by-frame Play
To quickly pause play, press PAUSE on the remote. To advance the still
picture one frame at a time, press PAUSE repeatedly.To resume play, press
PLAY B.
To freeze the picture using the Menu Bar, follow these steps.
●
Before you begin, make sure the Recorder is in DVD mode. Press DVD so
the DVD light appears on the front of the Recorder.
1
Press SYSTEM MENU during play so Menu Bar 1 appears.
2
Press B repeatedly to select
3
Press L to freeze the picture. Press s or B to move the
picture backward or forward one frame at a time.
Do not leave a still picture on your TV more than five minutes.This
may etch the image onto your picture tube permanently. Other still
visual elements, such as TV station logos or video games, also will
damage your TV if left too long.
d H E
st
o
L B
e
DVD pause
0:29:40
0:00:07
4
Press PLAY B to resume regular play.
5
Press SYSTEM MENU to remove the Menu Bar.
Sound
Choose a sound setting based on the capabilities of the equipment to
which you connected the Recorder. See pages 10-16 and 65.
●
Before you begin, make sure the Recorder is in DVD mode. Press DVD so
the DVD light appears on the front of the Recorder.
1
During play, press SYSTEM MENU so Menu Bar 1 appears
at the top of the TV screen.
2
Press B repeatedly to select
3
Press K or L to select st (stereo) or sur (Dolby Surround).
Select st (stereo) to hear stereo sound.This will work with
equipment that has right and left audio jacks (usually red and white).
Select sur (Dolby Surround) if your audio equipment is compatible
with Dolby Surround. If it is, usually a Dolby Pro Logic logo will
appear on the equipment.
d H
s B
st K
L
L F
DVD play
1 :2 3 :45
0 :3 0 :02
4
Press SYSTEM MENU to remove the Menu Bar.
4:16 PM Page 39

Still Picture/Frame-by-Frame Play, Sound 39

in Menu Bar 2.
d
in Menu Bar 2.
E
STANDBY-ON
OPEN/CLOSE
1 2 3
EJECT
TV/VIDEO
4 5 6
7 8 9
VCR Plus +/TIMER MONITOR CHANNEL
0
VCR CLEAR DVD
1,5
DISC SYSTEM
MENU MENU
2-3
OK
SELECT RETURN
PLAY
4
VCR REC STOP DVD REC
STANDBY-ON
OPEN/CLOSE
1 2 3
EJECT
TV/VIDEO
4 5 6
7 8 9
VCR Plus +/TIMER MONITOR CHANNEL
0
VCR CLEAR DVD
1,4
DISC SYSTEM
MENU MENU
2-3
OK
SELECT RETURN
PLAY
Helpful Hint
• The Recorder also refers to
Sound settings as Analog output.
The sound the Recorder sends to
your Stereo or TV is analog, or
two-channel, left and right. You
are using analog sound if you
used the red/white, left/right,
Audio jacks. See page 65.
Whether you adjust the sound
here or as described on page 65,
the results will be the same.