Philips DVDR600VR/37B Owner's Manual page 59

E9480UD_EN.qx3 05.1.8
Locking or Unlocking Specific Discs
Not all Discs are rated or coded by Parental levels.You may choose to
specifically lock or unlock a Disc by choosing Play once or Play always.This
way, you can disable viewing regardless of the rating of a DVD. You will
need to know your four-digit code in order to view the Disc.
●
Before you begin, make sure the Recorder is in DVD mode. Press DVD so
the DVD light appears on the front of the Recorder.
1
Insert a Disc.
screen. (Child Lock should be Locked. See page 58.)
locked
Access Control
|
p Play once [ ] [ ] [ ] [ ]
Play always [ ] [ ] [ ] [ ]
Choose 'Play always' to insert the disc in
the child-safe list
2
Press K or L to select Play once or Play always.Then, press
the Number buttons to enter your four-digit code.
If you select Play once, the Disc will play one time. If you stop
playback, open the Disc tray, or turn off the Recorder's power, the
Access Control screen will reappear when you try to play the Disc
again.
If you select Play always, the Disc will play even if you turn off the
Recorder, open the disc tray, or set Child Lock to Ç (Locked). See
page 58.
3
If you later decide to lock the Disc so it will not play always:
When you insert the Disc, safe { { appears on the TV screen. Press
STOP C while safe { { is on the TV screen. Locked | | will
appear. If the Disc continues playing, press STOP C again to stop
playback.You may need to turn off the Recorder or remove the Disc
before the Disc is completely Locked.The next time you turn on the
Recorder or try to play the Disc, the Access Control screen will
appear.The Disc will not play unless you enter the four-digit code.
4:16 PM Page 59
The Access Control message will appear on the TV
Access Control (cont'd) 59
STANDBY-ON
1 2 3
4 5 6
7 8 9
VCR Plus +/TIMER MONITOR
0
VCR CLEAR
DISC
MENU
OK
SELECT
PLAY
VCR REC STOP
MODE PLAY MODE AUDIO
REC
FSS T/C DISPLAY
VOLUME MUTE
TV
1
Insert a Disc.
Helpful Hints
• The Access Control screen will
appear when you try to play a
Locked Disc. If you do not know
your code, press STOP C .Then,
select Access Control as
described in steps 1-3 on page
58. When you are asked to
enter the code, press STOP C
four times (no indication will
appear in the menu). Press
SYSTEM MENU, then press PLAY
B to start playback.This
restores all the Access Control
settings to their original factory
settings. All Discs can play, and
you should set a new code.
• Two-sided DVDs may have a
different ID for each side.To
unlock the entire Disc, unlock
each side.
• Multi-volume Disc sets may have
a different ID for each volume.
Unlock each volume.
OPEN/CLOSE
EJECT
TV/VIDEO
CHANNEL
DVD
SYSTEM
MENU
2
RETURN
DVD REC
3
PAUSE
SLOW
MODE
SEARCH