Philips DVDR3506/37B Quick Start Manual page 41

Analog TV For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69),
the channel will be decided as soon as you enter the channel number.
Analog CATV
For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13-
125), the channel will be decided as soon as you enter the channel number.
Digital TV For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
Digital CATV For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14-
135), the channel will be decided as soon as you enter the channel number.
minor channels
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
<Hint>
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) "5": [0]+[5]
• For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.
• For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed.
[K / L] does not skip the non-existed minor channels.
Checking, canceling, or correcting the timer
programming information
1) Press [STANDBY-ON y y ].
2) Press [TIMER].
3) Check the information on the list you will need.
Timer Programming
JAN/ 2/07 12:00 AM 125.1 SP
SP (1:00)
Date
JAN/02
4-A) To delete the timer program:
1 Use [K / L] to select the program you want to
delete, then press [OK].
2 Use [K / L] to select "Delete", then press [OK].
Confirmation window will appear.
3 Use [K / L] to select "Yes", then press [OK].
4-B) To correct the timer program:
1 Use [K / L] to select the program you want to
correct, then press [OK].
2 Use [K / L] to select "Program Change", then
press [OK].
3 Correct the timer program by using
[K / L / { / B], then press [OK].
5) Press [TIMER] to exit.
6) Press [STANDBY-ON y y ] to return to the timer
standby mode.
Note
• Press [TIMER] to check the timer recording in progress.
When the timer recording is proceeding, that
program will be highlighted with red. In this case,
you cannot select any other program.
E7H42UD_DVDR3506-37_EN.indd 41 E7H42UD_DVDR3506-37_EN.indd 41
TIMER RECORDING
How to select a channel number for the timer recording
MON JAN/01 11:00AM
Start End CH
12:00AM 1:00AM DTV125. 1
New Program
If the timer program did not complete correctly,
the error number appears in the timer pro-
gramming list.
Timer Programming
Date Start
E41 JAN/02 12:00AM 1:00AM
New Program
Each error number means:
E1-22 Recording error other
E37-39 than below
E24 Unrecordable disc
E25-26 Copy prohibited
program
E29 Disc protected
E30 Disc full
E35 PCA full *1
E36 Already finalized
video format disc
E40 Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.
• A program with the error number is grayed in the timer
programming list.
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
*1 PCA is a disc's space reserved for recording test.
TUE JAN/02 11:00AM
End CH
DTV125. 1
1/1
E41 Power failed
E42 No disc when
recording
E43 Already 49 titles
recorded
E44 Already 254 chapters
recorded
E45 Copy prohibited
program
E46 It is impossible to
record additionally
on a disc recorded
by other units
when setting "
Make Recording
Compatible" to "OFF".
EN EN 41 41
2007/12/28 10:53:17 2007/12/28 10:53:17