Dv Dubbing; Guide To Dv And On-Screen Display - Philips DVDR3506/37B Quick Start Manual

Digital video disc recorder with digital tuner
Hide thumbs Also See for DVDR3506/37B:
Table of Contents

Advertisement

Guide to DV and On-Screen Display

This function helps you to easily dub the contents of the DVC (digital video camcorder) to DVD.
You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or
reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is
compliance with the IEEE1394 standards. When you connect to DV-IN jack on the front of this unit, select "E3" position
by using [SOURCE] or [CH
operating your DVC.
When the DVC is in
1
video mode...
1/ 1
1/ 1
2
Control
DVD
DV Audio
Stereo1
Start Rec
3
4
The following instructions are described with the operations using the remote control of this unit.
1. DV icon
2. Indicator of active device
• When the "Control" is
highlighted, press [OK] to display
the item selection. Use [K / L] to
select the device you wish to
operate, then press [OK] to
activate.
• Select "DVD" to control this unit.
• Select "DV Input" to control your
DVC.
3. Recording audio mode
• Other than the DV camcorder is in
stop mode, the "DV Audio" can be
selected. Press [OK] to display the
item selection and then use
[K / L] to select the audio you
wish to output. Press [OK] again
to activate.
• Select "Stereo1" to dub the stereo
sound.
• Select "Stereo2" to dub the sound
with after recording sound.
• Select "Mix" to dub the stereo1
and stereo2.
4. Indicator of dubbing function
• When the unit is ready for
dubbing, "Start Rec" will appear.
• When the unit is in dubbing,
"Pause Rec" will appear.
5. Channel position
• When you select "E3" by using
[SOURCE] or [CH
IN)" will appear.
E7H42UD_DVDR3506-37_EN.indd 47
E7H42UD_DVDR3506-37_EN.indd 47

DV DUBBING

/
] on the remote control and press [INFO] to show the DV dubbing information for the
+RW
The menu changes according to
E3 (DV-IN)
what mode of DVC.
AB-1234
0:12:34
Switch the mode on the DVC
to video mode for the dubbing
SP(2Hr)
2:00
6. Product name of your DVC
• If the unit cannot recognize the
input signal from the DVC or the
unknown product, "No Device" or
"****" will appear instead.
7. Status of the current operation
and the time counter
Each icon means (Available icons
may vary depending on the DVC):
DVC is in stop mode.
DVC is in playback mode.
DVC is in pause mode.
DVC is fast forwarding.
(standard speed)
DVC is fast forwarding.
(faster than above)
DVC is fast forwarding.
(faster than above)
DVC is slow forwarding.
(standard speed)
DVC is slow forwarding.
(faster than above)
DVC is slow forwarding.
(faster than above)
], "E3 (DV-
/
When the DVC is in camera
1/ 1
information.
mode...
1/ 1
+RW
5
E3 (DV-IN)
AB-1234
0:12:34
SP(2Hr)
2:00
7
6
DVC is fast forwarding.
(in stop mode)
DVC is fast reversing.
(in stop mode)
DVC is fast reversing.
(standard speed)
DVC is fast reversing.
(faster than above)
DVC is fast reversing.
(faster than above)
DVC is in slow reverse
playback.
DVC is in recording.
DVC is in recording pause
mode.
EN
EN
47
47
2007/12/28 10:53:22
2007/12/28 10:53:22

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvdr3506/37Dvdr3506Dvdr3506/37xDvdr3537

Table of Contents