Table of Contents
Advertisement
Troubleshooting
Problem (Recording)
The wrong TV channel was
decoded (recorded) after you
programmed a recording
using the S
V
HOW
IEW
Picture is fuzzy and
brightness varies when
copying DVD Video discs or
prerecorded video cassettes.
Recordings are not occurring
as scheduled. New recordings
cannot be made.
The picture on my decoder
appears to be distorted
during recording.
60
dvdr3383_eu_eng_26271.indd 60
dvdr3383_eu_eng_26271.indd 60
(continued)
1) Enter the S
channel.
2) Press OK to confi rm.
3) Check the channel number in the {Program #} input fi eld. If this
®
system.
does not correspond to the desired TV channel, select this
entry fi eld and change the channel number.
4) Press OK to confi rm.
– This happens if you try to copy DVDs or video cassettes that
have been copy-protected. Even though the picture on the TV is
fi ne, but the recording on the DVD recordable disc is faulty.
This interference is unavoidable with copy-protected DVDs or
video cassettes.
– The DVD recordable disc has a limited recording lifetime, please
change a new disc for recording.
– The TV channel you want to record is not stored or you
selected the wrong program number. Check the TV channels
stored.
– You have to reset the timer recording after adjusting the clock
setting.
– You cannot use the recorder to duplicate copy-protected
materials (DVDs or video tapes) onto a DVD recordable disc.
– If you are recording a programme from your decoder box, you
can view the same programme by pressing TV/DVD on the
recorder's remote control.
Solution
V
®
programming number of the desired TV
HOW
IEW
2006-09-27 10:44:50 AM
2006-09-27 10:44:50 AM
Advertisement
Table of Contents
