Table of Contents
Advertisement
PLAYBACK settings
Parental Rating
Level
Enter Password
* * * *
OK
Cancel
Set Rating Level
4. PG 13
5. PG R
4. PG 13
New password
New Password
New password
* * * *
Confirm password
Digital Audio
Output
dvdr3383_eu_eng_26271.indd 51
dvdr3383_eu_eng_26271.indd 51
DVD System Menu Options
(underlined options are the factory default settings)
7. NC 17
{
}
8. Adult
{
}
DVDs that are rated higher than the level you have selected will not play
unless you enter your four-digit pin code.
Helpful hints:
–
VCD, SVCD, CDs have no level indication, so parental control has no effect
on these type of discs. This also applies to most illegal DVDs.
–
Some DVDs are not coded with a rating though the movie rating may be
printed on the disc cover. The rating level feature does not prohibit play of
such discs.
To change your password
1) Select { Parental Rating Level } and press OK.
You will be prompted to enter your four-digit pin code.
2) Use the numeric keypad 0-9 to enter your four-digit pin
code and select
OK
remote control to confi rm.
The set rating level menu appears.
3) Select
OK
New
password menu.
New
OK
4) Use the numeric keypad 0-9 to enter your new four-digit
pin code, then press
the same pin code a second time.
OK
5) Select
OK
Cancel
OK
To abort the change, select
Adjust the digital output setting only if you have connected other
devices to the coaxial socket on the recorder.
1) Use
keys to select one of the options.
All
{
}
LPCM
{
}
2) Press OK to confi rm your selection.
– No children under age 17; not recommended
viewing for children under age 17.
– Mature material; should be viewed only by
adults due to graphic sexual material, violence or
language.
in the menu and press OK on the
OK
in the menu and press OK to access new
to select the next entry fi eld and enter
in the menu and press OK to confi rm.
CANCEL
– Select this if you have used the COAXIAL
socket on the recorder to connect to a stereo
receiver that has a built-in multichannel decoder.
– Select this if the connected audio equipment is
not capable of decoding multichannel audio
Dolby Digital and MPEG-2 multichannel signals
are converted to PCM (Pulse Code Modulation).
(continued)
and press OK.
51
2006-09-27 10:44:49 AM
2006-09-27 10:44:49 AM
Advertisement
Table of Contents
