Table of Contents
Advertisement
A
CABLE
SATELLITE
ANTENNA
TV-OUT
Connecting to a Cable Box or
Satellite Receiver
Option 1
If your Cable Box/Satellite Receiver
has only an antenna output socket
(RF OUT or TO TV),
see the section "Step 1: Basic Recorder
Connections – Connecting the antenna
cables" for the complete connections to
your TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
dvdr3383_eu_eng_26271.indd 17
dvdr3383_eu_eng_26271.indd 17
Step 2: Optional Connections
OUT
IN
VIDEO
AUDIO
RF
S-VIDEO
R
L
C
1
2
EXT
EXT
AUX - I/O
ANTENNA-IN
B
Back of a Cable Box
TO TV
or Satellite Receiver
(Example only)
TO TV - I/O
Option 2 (see the above illustration)
If your Cable Box/Satellite Receiver
has a SCART output socket
A
Keep the existing antenna connection
from the Cable Box/Satellite Receiver to
your TV.
B
Use the SCART cable to connect the
EXT1 TO TV-I/O socket on the
recorder to the corresponding SCART
input socket on the TV.
C
Use another SCART cable to connect the
EXT2 AUX-I/O socket on the recorder
to the SCART output socket (or labelled
as TV OUT or TO TV) on the Cable
Box/Satellite Receiver.
To start playback, select the TV channel
directly on the Cable Box/Satellite
Receiver. To view the picture from a
connected external device, press the
TV/DVD key on the remote control.
~
MAINS
TV
S-V ID E O
AU D IO
IN
O U T
V ID E O IN
17
2006-09-29 1:05:25 PM
2006-09-29 1:05:25 PM
Advertisement
Table of Contents
