Hardware Contents; Preparation - Dyna-Glo DGP321SNN Manual

HARDWARE CONTENTS

AA
M6x16
Bolt
Washer
Qty. 18
GG
M6x12 Shoulder
Flat Bolt
Qty. 8

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list on previous page and hardware contents above. If any part is missing or damaged, do
not attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 50 minutes with 2 people.
Tools Required for Assembly and Leak Testing (not included): Phillips screwdriver, Spray bottle
THIS UNIT IS HEAVY. Two people required for safe assembly.
Two people required for safe assembly. Some parts may contain sharp edges. Wear protective
gloves if necessary. Read and follow all safety statements, warnings, assembly instructions and
use and care instructions before attempting to assemble and use.
BB CC
M6 M6
Plain Spring
Washer
Qty. 2 Qty. 2
HH
Bolt
Qty. 4
CAUTION
DD
M6
Wing Nut
Qty. 2
II
Wrench
Qty. 1
6
EE FF
M6x35 M3x10
Bolt Bolt
Qty. 4 Qty. 4
JJ
M4x12
Bolt
Qty. 2