Table of Contents
Advertisement
Playback settings
Access
Access Control
Enter PIN of your choice.
This will be used to access locked features
Child lock:
Change PIN:
Display
OSD:
Front panel
brightness:
System Menu Options
(underlined options are the factory default settings)
When this is selected, you will be prompted to enter the four-
digit pin code.
Notes:
– When doing this for the fi rst time, use the alphanumeric
keypad 0-9 on the remote control to enter any four-digit pin
code you prefer.
– If you forget your four-digit pin code, key in '1504'. Then
enter any four-digit you prefer and enter the same pin code
again to confi rm it.
With this feature, you can prevent children from viewing certain
discs or the recorded titles in the hard disk.
{ On }
– Enable child lock function.
A four-digit pin code must be entered in
order to play the locked disc or title in the
hard disk.
{ Off }
– All discs can be played.
Notes:
– This recorder can memorise settings for 50 discs.
– When this feature is enabled, it appears as { Child Lock } at
the bottom of the coloured options screen whenever you select
a title in the content menu. You can press the Yellow button
on the remote control to set the child lock on or off.
Set a new pin code. Follow the instructions in the menu to
change the pin code.
Note: To cancel the change, press BACK on the remote
control .
Set the level of on-screen display information.
{ Full }
– Complete information is always displayed
during use.
{ Reduced }
– The help text and colour button bar will be
removed from the display.
Set the front panel display brightness.
{ Bright }
– Normal brightness.
{ Dimmed }
– Medium brightness.
{ Off }
– Turn off the display.
(continued)
87
Advertisement
Table of Contents
