Option 5: Connecting To A Hdmi- Compatible Tv - Philips DVDR5570H/05B User Manual

Step 1: Basic Recorder Connections
ANTENNA INTERCONNECT CABLE
(OPTIONAL, REFER TO MANUAL)
TO TV
G-LINK
TO TV ANTENNA ANALOG
INPUT ANTENNA INPUT
TV
Option 5: Connecting to a HDMI-
compatible TV
HDMI (High Defi nition Multimedia
Interface) is a digital interface that allows
pure digital video transmission without
the loss of image quality.
Connect a HDMI cable (not supplied)
from the HDMI OUT on the main unit
to the HDMI IN on a HDMI-compatible
device (e.g., HDMI TV, HDCP compliant
DVI TV).
Helpful Hints:
– Some HDMI TVs/monitors from different
manufacturers may adhere to different
standards resulting in unreliable signal
transfers.
– The HDMI connector is only compatible
with HDMI compliant devices and DVI-TVs.
– The teletext information will not be
accessible in the recorder's Live TV mode.
20
DIGITAL
ANTENNA INPUT
DIGITAL ANTENNA
LOOP THROUGH
CVBS-OUT
EXT 1 TO VCR/SAT EXT 2
S-VIDEO
OUT
(continued)
HDMI
OUT
Y P
B
L
P
R
R
COAXIAL
AUDIO COAXIAL COMPONENT
DIGITAL
OUT DIGITAL OUT VIDEO OUT IN
Option 5
Note:
To enable HDMI connection, you must
set the recorder's video output correctly.
A
Make an addition video connection from
this recorder to your TV using Scart,
S-Video or Video (CVBS).
B
Turn on your TV to the correct viewing
channel for the above video connection.
C
When you have completed the
installation and set-up, change the video
output setting of this recorder as
follows:.
1) Press OPTIONS.
2) Move to { Settings } > { Video
output } > { Active video output }
> { HDMI output }, then press OK
to confi rm.
D
Switch your TV to the correct viewing
channel for the HDMI connection (refer
to your TVs user manual).