Step 2: Optional Connections; Connecting To A Cable Box Or Satellite Receiver - Philips DVDR5570H/05B User Manual

(front view)
G-LINK
TO TV ANTENNA ANALOG
INPUT
ANTENNA INPUT
D
B
Connecting to a Cable Box or
Satellite Receiver
Option 1
If your Cable Box/Satellite Receiver
has only an antenna output socket
(RF OUT or TO TV),
see 'Basic Recorder Connections -
Connecting the antenna cables' for
details.
Option 2 (as shown on the above illustration)
If your Cable Box/Satellite Receiver
has a Scart output socket
A
Keep the existing antenna connection
from the Cable Box/Satellite Receiver to
your TV.
B
Connect a scart cable (supplied) from the
EXT1 TO TV socket on the recorder
to the corresponding SCART socket on
the TV.

Step 2: Optional Connections

(rear view)
E
DIGITAL
HDMI
ANTENNA INPUT
OUT
ANTENNA INTERCONNECT CABLE DIGITAL ANTENNA
(OPTIONAL, REFER TO MANUAL) LOOP THROUGH
CVBS-OUT
L
TO TV EXT 1 TO VCR/SAT EXT 2
R
AUDIO
S-VIDEO
OUT OUT
C
Y P
B
P R
COAXIAL
COAXIAL COMPONENT
DIGITAL
DIGITAL OUT VIDEO OUT IN
TV
C
Connect another scart cable (not
supplied) from the EXT2-TO VCR/
SAT socket on the recorder to the Scart
socket (usually labelled as TV OUT or
TO VCR) on the Cable Box/ Satellite
Receiver.
D
Connect the G-LINK cable (supplied) to
the G-LINK socket on the recorder.
E
Place the G-LINK transmitter in front of
the Cable Box/ Satellite Receiver near to
the IR sensor (remote sensor) so that its
infrared detector can receive a clear
signal.
This allows you to control the tuner
of the Satellite Receiver/Cable Box
through the GUIDE Plus+ system.
Helpful Hint:
– If your TV is connected to the recorder via
the COMPONENT VIDEO (Y Pb Pr) sockets,
then connect the external cable box/satellite
receiver to the EXT1 TO TV socket.
Cable Box /
Satellite Receiver
MAINS
21