1. Manuals
  2. Brands
  3. Shimax Manuals
  4. Controller
  5. MAC5 Series
  6. Instruction manual

Shimax MAC5 Series Instruction Manual

Digital controller
Hide thumbs
Table of Contents

Advertisement

Quick Links

Thank you for purchasing SHIMAX product.
Thank you for purchasing SHIMAX product.
Thank you for purchasing SHIMAX product.
Thank you for purchasing SHIMAX product.
Please check that the product is the one you ordered.
Please check that the product is the one you ordered.
Please check that the product is the one you ordered.
Please check that the product is the one you ordered.
Please operate after you read the instruction manual and fully understand it
Please operate after you read the instruction manual and fully understand it
Please operate after you read the instruction manual and fully understand it
Please operate after you read the instruction manual and fully understand it
Please ensure that this manual is given to the final user of the instrument
Please ensure that this manual is given to the final user of the instrument
Please ensure that this manual is given to the final user of the instrument.
Please ensure that this manual is given to the final user of the instrument
Preface
Preface
Preface
Preface
1.Matters regarding safety
1.Matters regarding safety
1.Matters regarding safety
1.Matters regarding safety
2.Introduction
2.Introduction
2.Introduction
2.Introduction
2 2 2 2 - - - - 1.Check before use
1.Check before use
1.Check before use
1.Check before use
2 2 2 2 - - - - 2.Caution for use
2.Caution for use
2.Caution for use
2.Caution for use
3.Installation and wiring
3.Installation and wiring
3.Installation and wiring
3.Installation and wiring
3 3 3 3 - - - - 1. Installation site (environmental conditions)
1. Installation site (environmental conditions)
3 3 3 3 - - - - 2. Mounting
2. Mounting
2. Mounting
3 3 3 3 - - - - 3. External dimension and panel cutout
3. External dimension and panel cutout
3. External dimension and panel cutout
3. External dimension and panel cutout
3 3 3 3 - - - - 4. Wiring
4. Wiring
3 3 3 3 - - - - 5. Terminal arrangement diagram
4. Description of front panel
4. Description of front panel
4. Description of front panel
4 4 4 4 - - - - 1. Names of front panel.
1. Names of front panel.
1. Names of front panel.
4 4 4 4 - - - - 2. Explanation of front panel section
2. Explanation of front panel section
2. Explanation of front panel section
2. Explanation of front panel section
5. Description of screens
5. Description of screens
5 5 5 5 - - - - 1. How to move to another screen
1. How to move to another screen
1. How to move to another screen
5 5 5 5 - - - - 2. Setting Method
2. Setting Method
2. Setting Method
2. Setting Method
5 5 5 5 - - - - 3. Power
3. Power- - - - on and initial screen display
3. Power
3. Power
on and initial screen display
on and initial screen display
on and initial screen display
5 5 5 5 - - - - 4. Monitoring screen
4. Monitoring screen
4. Monitoring screen
4. Monitoring screen
6. Operating setting
6. Operating setting
6. Operating setting
7. MODE setting
7. MODE setting
7 7 7 7- - - - 1 . MODE1 :Key lock and SV Limit setting
7 7 7 7 - - - - 2. MODE2: Scale and PV setting
7 7 7 7 - - - - 3. MODE3
3. MODE3- - - - 4:Out 1
4:Out 1- - - - 2 setting
2 setting
3. MODE3
3. MODE3
4:Out 1
2 setting
2 setting
7 7 7 7 - - - - 4. MODE 5:Event setting
4. MODE 5:Event setting
7 7 7 7 - - - - 5 . MODE6:DI setting
5 . MODE6:DI setting
5 . MODE6:DI setting
5 . MODE6:DI setting
7 7 7 7 - - - - 6 .DI operation character table
6 .DI operation character table
6 .DI operation character table
6 .DI operation character table
7 7 7 7 - - - - 7 .Measuring range code table
7 .Measuring range code table
7 .Measuring range code table
7 .Measuring range code table
8. Supplementary Explanation of Function
8. Supplementary Explanation of Function
8 8 8 8 - - - - 1 . Auto return function
1 . Auto return function
1 . Auto return function
1 . Auto return function
8 8 8 8 - - - - 2. Output Soft Start Function
2. Output Soft Start Function
2. Output Soft Start Function
2. Output Soft Start Function
8 8 8 8 - - - - 3. Event Selection Alarm Operation Figure
3. Event Selection Alarm Operation Figure
3. Event Selection Alarm Operation Figure
3. Event Selection Alarm Operation Figure
8 8 8 8 - - - - 4. AT (Auto Tuning)
4. AT (Auto Tuning)
4. AT (Auto Tuning)
4. AT (Auto Tuning)
8 8 8 8 - - - - 5 .Output
5 .Output
5 .Output- - - - characteristics figure
5 .Output
characteristics figure
characteristics figure
characteristics figure
9. Trouble Shooting
9. Trouble Shooting
9. Trouble Shooting
9. Trouble Shooting
9 9 9 9 - - - - 1. Cause and Treatment of Main Defects
9 9 9 9 - - - - 2. Cause and Treatment of Error Display
2. Cause and Treatment of Error Display
10. Specification
10. Specification
11. General Specification
11. General Specification
11. General Specification
11. General Specification
MAC5 Series
MAC5 Series
MAC5 Series
MAC5 Series
Digital Controller Instruction Manual
Digital Controller Instruction Manual
Digital Controller Instruction Manual
Digital Controller Instruction Manual
「 「 「 「 Notice
Notice」 」 」 」
Notice
Notice
Contents
Contents
Contents
Contents
1 1 1 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAC5 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Shimax MAC5 Series

Summary of Contents for Shimax MAC5 Series

  • Page 1: Table Of Contents

    Digital Controller Instruction Manual Digital Controller Instruction Manual Digital Controller Instruction Manual Digital Controller Instruction Manual Thank you for purchasing SHIMAX product. Thank you for purchasing SHIMAX product. Thank you for purchasing SHIMAX product. Thank you for purchasing SHIMAX product.

  • Page 2: 3 3 3

    Preface Preface Preface Preface 2.Introduction 2.Introduction 2.Introduction 2.Introduction This instruction manual is intended for those who will be involved in wiring, 2 2 2 2 - - - - 1. Check before use 1. Check before use 1. Check before use 1.

  • Page 3: 3 3 3

    MAC5 panel cutout (unit: mm) Applicable thickness is 1.2 to 2.8mm 「Note」: input type Terminal arrangement MAC5D + + + + 0.8 + + + + 0.8 + + + + 0.8 thermocouple or voltage, errors — — — — 0 MAC5A 96min 96min...

  • Page 4: Description Of Screens

    (3 ) (UP) key (4)  (ENTRY/REGISTER)key Press (UP) key one time, and the shown value increases by The setting data changed on each screen is determined (the one numerical value. decimal point of the minimum digit is also lighted off). By pressing continuously, the value By pressing the key Press ...
  • Page 5 5 5 5 5 - - - - 2. Setting Method 2. Setting Method 2. Setting Method 2. Setting Method To change settings, display an appropriate screen and change the setting (value or function) by pressing  or  key. On the output monitor screen of basic screens, you can change the control output from "Automatic"...

  • Page 6: Operating Setting

    AT (Auto tuning) execution screen AT (Auto tuning) execution screen AT (Auto tuning) execution screen AT (Auto tuning) execution screen EV2(Enent 2)operating point setting screen EV2(Enent 2)operating point setting screen EV2(Enent 2)operating point setting screen EV2(Enent 2)operating point setting screen Initial value:：...

  • Page 7: Mode Setting

    7 7 7 7 - - - - 2. MODE2:Scale and PV setting 2. MODE2:Scale and PV setting 2. MODE2:Scale and PV setting 2. MODE2:Scale and PV setting MODE 2 MODE 2 Scale and PV setting Scale and PV setting MODE 2 MODE 2 Scale and PV setting...

  • Page 8: Mode3

    7 7 7 7 - - - - 3.MODE3 3.MODE3- - - - 4:Out 1 4:Out 1- - - - 2 setting 2 setting 7 7 7 7 - - - - 4. MODE 5:Event setting 4. MODE 5:Event setting 3.MODE3 3.MODE3 4:Out 1...

  • Page 9: Supplementary Explanation Of Function

    7 7 7 7 - - - - 5 .MODE6:DI setting 5 .MODE6:DI setting 5 .MODE6:DI setting 5 .MODE6:DI setting ・When  ～  are conducted during AT execution, they are performed at the time of AT MODE 6 Digital input setting MODE 6 Digital input setting MODE 6 Digital input setting MODE 6 Digital input setting...

  • Page 10: 8 8 8

    8 8 8 8 - - - - 4.AT (Auto Tuning) 4.AT (Auto Tuning) 4.AT (Auto Tuning) 4.AT (Auto Tuning) ・If AT is performed by FIX (constant value control)、AT monitor LED blinks and light is put out by termination or intermediate release. ・AT at the time of 2 output specification is as follows.
  • Page 11 Setting Setting system : By four front keys （     （ ＳＶSetting range : Same with measuring range Setting lock : Key setting four levels , DI one level Operations Level Lock Content No lock Execution SV and a manual numerical change are possible. And change of a key lock level is possible. Key setting Possible to change numerical value manually and key lock level.
  • Page 12 System Event out2 EV2 Control output 2 voltage pulse/Current Event out3 EV3 The contents of this instruction are subject to change without notice. CO., LTD Head Office: 11-5 Fujimicho, Daisen-shi, Akita 014-0011 Japan Phone: +81-187-86-3400 FAX. +81-187-62-6402 URL;http://www.shimax.co 12 12...

This manual is also suitable for:

Mac5dMac5bMac5cMac5a

Table of Contents

Save PDF