Philips CSS9216/12 User Manual page 21

•
Make sure that the Wireless Intelligent Stream
Handling (WISH) option is enabled (if available
on the Wi-Fi router).
•
Make sure that the Quality of Service (QoS)
option is enabled (if available on the Wi-Fi router).
•
Turn off other home routers.
Network
Wireless network distorted or not found.
•
Make sure that your Wi-Fi router is Wi-Fi
certified. The SoundHub is only compatible with
Wi-Fi certified routers.
•
Your SoundHub does not support WPS-Pin
routers.
•
Your SoundHub does not support all WPS-PBC
routers. If your home routers are WPS-PBC
routers, reset all settings in your router.
•
Make sure that your router SSID name consists
of normal characters or digits, with no space or
special characters, such as %/#/*, insterted.
•
Make sure that SSID broadcast on the Wi-Fi
router is enabled.
•
Make sure that the wireless network is not
disturbed by microwave ovens, DECT phones, or
other neighboring Wi-Fi devices.
•
Make sure that there is no overlap between your
wireless network and other nearby networks.
Wi-Fi setup page not found.
•
Make sure that you enter the correct IP address
(see 'IP address' on page 16).
RESTARTING appears on the display panel.
•
SoundHub restarts automatically due to critical
firmware problem.
GETTING IP ADDRESS appears on the display panel.
•
The SoundHub is obtained IP address from the
DHCP server.
11 Index
A
AirPlay
audio
Wi-Fi network
amplifier
audio
auto volume
night mode
sound mode
specifications
surround sound mode
audio source
remote control
B
brightness
C
care
environment
product
check current version
compliance
connect
audio (analog cable)
audio (coaxial cable - digital)
audio (optical cable - digital)
audio from TV and other devices
non WPS router
Wi-Fi network
WPS router
connectors
back connectors - main unit
back connectors - subwoofer
side connector
D
disable
auto volume
night mode
display panel
14
8
17
13
13
13
17
13
8
16
4
4
17
2
8
8
8
8
9
9
9
7
7
7
13
13
5
EN
19