Philips CSS9216/12 User Manual page 19

8 Update software
To continue to get the best features and support
for your SoundHub, update the software regularly.
Compare the version of your current software with
the latest version on www.philips.com/support.
Check software version
1
Press SETUP repeatedly to select VERSION on
the display panel.
2
Press OK.
» The software version is displayed.
Update software through
computer
Log in to your SoundHub web page to perform the
software update.
1
Make sure that the SoundHub and computer
are connected to the same Wi-Fi network
(see 'Connect to a Wi-Fi network' on page 8).
2
Open a web browser on your computer.
3
Check and enter the IP address to access the
configuration page (see 'IP address' on page
16).
4
Select the firmware update tab.
» The current firmware version is displayed.
5
If a newer version is available, download it
from www.philips.com/support, and then click
OK.
» A new page is displayed. Your SoundHub
prepares for the firmware update.
6
Click Select file (Select file) and locate the
firmware that you downloaded from www.
philips.com/support.
7
Click OK to start the software update. Wait
until the upgrade is complete.
» A new page is displayed when the
upgrade is complete. Your SoundHub
loads the new firmware, reconnects to
your home network, and enables AirPlay.
9 Product
specifications
Note
•
Specifications and design are subject to change
without notice.
Amplifier
•
Total output power:
•
Europe and Asia: 400W RMS (30% THD)
•
Latin America: 320W RMS (10% THD)
•
Frequency response: 20 Hz-20 kHz / ±3 dB
•
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
•
Input sensitivity:
•
AUX1, AUX2: 450 mV
•
Music iLink: 170 mV
Audio
•
S/PDIF Digital audio input:
•
Coaxial: IEC 60958-3
•
Optical: TOSLINK
Main unit
•
Dimensions (WxHxD): 150 x 41 x 126 mm
•
Weight: 0.4 kg
Subwoofer
•
Output power: 100W RMS (30% THD)
•
Power supply: 220-240 V~, 50 Hz
•
Power consumption: 55 W
•
Standby power consumption: ≤ 0.5 W
•
Impedance: 4 ohm
•
Speaker drivers: 165 mm (6.5") woofer
•
Frequency response: 20 Hz-150 Hz
•
Dimensions (WxHxD): 196 x 397 x 357 mm
•
Weight: 7.6 kg
•
Cable length: 3 m
EN
17