ADPRO
4
Front LED Indicators
If you are using a single module as an extension on an ADPRO device of the FastTrace 2 Series or iFT Series,
with a built-in MIO card, then the LEDs on the XO I/O Interface USB module follow the LEDs on the front of the
ADPRO device.
LED
Icon
Green LED
Yellow LED
Blue LED
Caution!
When the 3 LEDs are flashing simultaneously, the system is servicing the recording disks (upgrading,
formatting...). In that case, do not turn off power.
32688_02
Description
Indicates that power is on. The green LED periodically blinks (goes out briefly).
This is normal behaviour.
Indicates a fault. If the yellow LED lights up, check the status of your device. For
more information, see the XO Client Software User Manual (21796).
Indicates storage media activity.
XO I/O Interface USB Module – Technical Manual
19