Table of Contents
Advertisement
ADPRO
4.
Select the desired set number for the module in the Device Node column.
5.
Click Apply Configuration.
The message Are you sure to apply your configuration? appears.
6.
Click Apply.
The Waiting to apply... message appears.
7.
Wait for the message to disappear.
8.
If you are mapping a double module, repeat for the second module: connect it to the XO device using the
USB cable, click Refresh in the configuration tool, and map the module to the correct set number.
9.
If the Product columns shows any other devices (in the example screen above, the FT232 USB Serial = an
RS-485-to-USB converter), make sure that these devices are also mapped to a suitable USB port.
10. Click Logout.
11. Restart the XO device.
The XO client will not discover the I/O cards until you have restarted the device.
12. Open the XO client and check if the added module is visible in the I/O window: choose System >
Connections > I/O. For example, if you have added a single module to serve as a second set of I/O cards,
you will see a second line indicating 2-I/O card + ext.
13. If there were other devices in the hardware mapping list, then:
Check their serial ports settings (System > Connections > Serial Ports / PTZ).
o
Test all related functionality (PIR detectors, analogue PTZ camera, modem...).
o
32688_02
XO I/O Interface USB Module – Technical Manual
15
Hide quick links:
Advertisement
Table of Contents
