Advertisement
4
| XPRESSFILL Systems LLC
3
Troubleshooting
If at any time you have issues with the setup or adjustment of your XF2200/XF4400 can filling
machine, or any questions about filling your product, please contact XpressFill at the number
listed on the front of this manual. We are always happy to assist you.
Premature Shut Off
The XF2200/XF4400 is a Level Fill machine, meaning that the flow of product will automati-
cally shut off when liquid touches the exposed metal of the CO2 and beverage fill spouts simul-
taneously. If moisture is allowed to collect between the two spouts, the filler will prematurely
shut off, stopping the fill or not allowing the fill to begin at all. The machine senses that it has a
full can at the point there is contact between the spouts.
To correct this problem, dry the spouts thoroughly. Once completely dry, filling should resume.
Excessive Foaming
If your fill tends to foam excessively, you have a number of options.
One - reduce the pressure (psi) of the liquid input vessel to slow the rate of flow.
Two - use the surgical tubing to fill from the bottom of the can.
Three - reduce the temperature of the liquid - this can be the most critical factor to maintain a
higher level of CO2 in your product and minimizing the amount of foam. We recommend no
o
higher than 37
F.
Other Problems
If any other issues arise with the machine, it is best to call the factory to resolve them. We are
here to help.
Advertisement
