Lifan 2.8GF-3/4 Manual page 9

1. Remove the clip and dismantle the air housing
2. Check and make sure the air cleaner core is intact
and clean. If it is broke, replace it with a new one.
F ig.17
3 . If the core is filthy, clean it in the following
sequence.
a) Clean the core in the cleansing solvent.
b) Dry it up
c) Dip a few drops of engine oil into it.
d) Squeeze excess oil
3.4 BATTERY (2.8GF-4、4GF-4 & 5GF-4)
4. Put the filter element in to the original position,
install the cover and secure it well.
.
Fig.18
9
Fig.19