Audio Setup - Philips HTS3367/12 Quick Start Manual

Audio Setup

(underlined options are the factory default settings)
Speakers Volume
Speakers Delay
HDMI Audio
Setup Menu Options
Access the speaker's level setup menu. Use
the volume level for each connected speaker between -6dB to
+6dB. See 'Getting Started - Setting the speakers' channels'.
Access the speaker's distance setup menu. Use
the delay times for the centre and rear speakers based on the
listening position and distance. See 'Getting Started - Setting
the speakers' channels'.
Note: 1 ms increase/decrease of delay time is equivalent to one (1) foot
change in distance. Use the longer delay time settings when the rear
speakers are closer to the listener than the front speakers.
This setting is only required if you are using the HDMI
OUT socket to connect your TV or other display device
(see 'Option 4: Connecting to a HDMI-compatible TV').
{ Off } – Turn off the HDMI audio output. You can still
enjoy the sound output through the speaker
system.
{ All } – The HDMI audio output will be same as the
audio stream being played back. In the case
when the playback audio format is not
supported, the audio output will be changed to
PCM (Pulse Code Modulation) automatically.
Notes:
– It may take a while for this unit and the input device to communicate
and initialise.
– It is not possible to listen to SACDs or copy-controlled DVD-Audio
CPPM (Content Protection for Playable Media) sources using the HDMI
connection.
(continued)
keys to adjust
keys to set
39