Step 4: Connecting The Fm Antenna; Step 5: Connecting The Power Cord - Philips HTS3367/12 Quick Start Manual

Basic Connections
Main Unit (rear)
FM antenna
Step 4: Connecting the
FM antenna
A
Connect the FM antenna (supplied) to
the FM 75 socket. (For some models,
Ω
it has been connected in the factory.)
B
Extend the FM antenna and fi x its ends to
the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antenna for
optimal reception.
– Position the antenna as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
18
(continued)
Step 5: Connecting the
After everything is connected
properly, connect the AC power
cord into the power outlet.
The standby LED on the main unit lights
up.
Helpful Hints:
– Refer to the type plate at the rear or
bottom of the product for identifi cation and
supply ratings.
– Before making or changing any
connections, make sure that all the devices
are disconnected from the power outlet.
Main Unit (rear)
power cord