Maintenance And Inspection; Environmental Conditions - piezosystem jena ENT Instruction Manual


Do not insert objects of any kind into the cabinet slots, as they may touch
dangerous voltage points, which can be harmful or fatal or may cause electric
shock, fire or equipment failure.

Do not place any heavy objects on any cables (e.g. power cords, sensor
cables, actuator cables, optical cables). Damage may cause malfunction or
shock or fire!

Do not place the units on a sloping or unstable cart, stand or table as they
may fall or not work accurately.
Immediately unplug your unit from the wall outlet and refer servicing to qualified
service personnel under the following conditions:

when the power supply cord or plug is damaged

if liquid has been spilled or objects have fallen into the unit

if the unit has been exposed to rain or water

if the unit has been dropped or the housing is damaged

5.1 maintenance and inspection

CAUTION!

Before cleaning the exterior box of the voltage amplifier, turn off the power
switch and unplug the power plug. Failure to do so may result in a fire or
electrical shock.

Clean the exterior box using a damp cloth that has been firmly wrung-out. Do
not use alcohols, benzene, paint thinner or other inflammable substances. If
flammable substances come into contact with an electrical component inside
the voltage amplifier, this may result in a fire or electrical shock.

5.2 environmental conditions

The amplifier can be used:

indoors only

altitude up to 2000 m

temperature: 5 ... 35 °C

relative humidity: 5 ... 95% (non-condensing)
Geschäftsführer: Dr. Bernt Götz • Telefon 03641/66880 • Fax 03641/668866 • www.piezosystem.com
36