DeWalt XR LI-ION DCB132 Original Instructions Manual page 46

E NGLIS H
extension cord could result in risk of
fire,electric shock, or electrocution.
• Do not place any object on top of
charger or place the charger on a soft
surface that might block the ventilation
slots and result in excessive internal
heat. Place the charger in a position away
from any heat source. The charger is
ventilated through slots in the top and the
bottom of the housing.
• Do not operate charger with
damaged cord or plug — have them
replaced immediately.
• Do not operate charger if it has received
a sharp blow, been dropped, or
otherwise damaged in any way. Take it to
an authorised service centre.
• Do not disassemble charger; take it to an
authorised service centre when service
or repair is required. Incorrect reassembly
may result in a risk of electric shock,
electrocution or fire.
• In case of damaged power supply cord the
supply cord must be replaced immediately
by the manufacturer, its service agent
or similar qualified person to prevent
any hazard.
44