Silvercrest SWV 733 A2 Operating Instructions And Safety Instructions page 46

SilverCrest SWV 733 A2
There are two different ways to configure the dual-band Wi-Fi range extender.
If you are not using the network default settings on your computer and have manually
set an IP address, you must restore the network settings to Automatically obtain
an IP address. For further details, please read the operating instructions for your
computer.
1. You can then configure the dual-band Wi-Fi range extender via the network cable. If you want to
configure the dual-band Wi-Fi range extender via the network cable, you must connect the dual-
band Wi-Fi range extender to your computer. Use the network cable included with the device for
this purpose. Insert one end of the network cable into the WAN/LAN socket (6) or the LAN socket
(7) of the dual-band Wi-Fi range extender and the other end into the LAN socket of your computer.
2. Alternatively, you can perform the configuration via a wireless network. To do so, start the search
for available wireless networks on your computer. The network SWV 733 A2 2.4G or SWV
733 A2 5G is displayed in the list of available wireless networks. Select the network SWV 733
A2 2.4G or SWV 733 A2 5G and click on the Connect button to connect wirelessly with the
dual-band Wi-Fi range extender. The dual-band Wi-Fi range extender is secured in its factory
defaults by a network key. After having entered the network key (9426824723156819), you
may have to click the option Connect without configuring the network. The message
"Limited network connection" may be displayed.
44 - English