Silvercrest SWV 733 A2 Operating Instructions And Safety Instructions page 35

SilverCrest SWV 733 A2
Insert the dual-band Wi-Fi range extender into a socket that is always easily accessible.
Then switch on the dual-band Wi-Fi range extender by turning the main switch (10) to the "ON" position.
The dual-band Wi-Fi range extender requires a certain amount of time (boot time) after it is switched on
before it is ready to use. After switching the device on, wait for approximately 30 seconds before using
the dual-band Wi-Fi range extender.
There are two different ways to configure the dual-band Wi-Fi range extender. If your wireless router
supports WPS, you can use this simple function to easily set up the Wi-Fi range extender. If you would
like to use a wireless router without WPS, you must connect the dual-band Wi-Fi range extender to your
computer via a network cable and configure it.
English - 33