First time tuning
The fi rst time when you access 'RADIO' mode,
follow the instructions to install the radio
stations.
1
Press RADIO.
'AUTO INSTALL ... PRESS PLAY' is
displayed.
2
Press u.
All detected radio stations are stored.
Once complete, it tunes to the fi rst
preset radio station.
•
To stop auto tuning, press
Note
•
This unit can store up to a maximum of 40 radio
stations (and 20 radio stations from AM/MW band).
•
If auto installation is not activated or less than 5
radio stations are stored, 'AUTO INSTALL' will be
displayed again the next time you turn on to radio
mode.
Listen to radio
1
2
Button
m M
x.
Reinstall all the radio stations
1
2
•
Press RADIO repeatedly to select 'FM' or
'AM/MW' band.
Use the remote control to control the
radio.
Action
Select a preset radio station.
Tune the radio frequency
backward/ forward.
Toggle between FM stereo
and FM mono mode.
Press and hold this button to
delete the preset station from
the preset list.
•
The preset number for
other radio stations
remain unchanged
Press RADIO repeatedly to select 'FM' or
'AM/MW' band.
Press and hold PROGRAM until
'STARTING INSTALL' is displayed.
All previously stored radio stations will
be replaced.
Note
If no stereo signal is detected or less than 5 stations
are detected during radio installation, 'CHECK
ANTENNA' is displayed.
EN
35