Listen To Radio; Tune To A Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually - Philips MCD909/12 User Manual

6 Listen to radio

Tune to a radio station

1
Press TUNER.
2
Press and hold
seconds.
» SEARCH] (SEARCH) is displayed.
[
»
The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
/ repeatedly until you fi nd optimal
reception.
Program radio stations
automatically
Note
•
You can program a maximum of 40 preset radio
stations.
1
In the tuner mode, press and hold PROG
for more than 2 seconds to activate
automatic program mode.
»
All available stations are programmed
in the order of waveband reception
strength.
»
The fi rst programmed radio station is
broadcast automatically.
22 EN
/ for more than 2
Program radio stations
manually
Note
•
You can program a maximum of 40 preset radio
stations.
1
Tune to a radio station.
2
Press PROG to activate program mode.
»
[PROG] blinks on the display.
3
Press / to allocate a number (1 to 20)
to this radio station, then press PROG to
confi rm.
»
The preset number and the frequency
of the preset station are displayed.
4
Repeat the steps above to program other
stations.
Note
•
To overwrite a programmed station, store another
station in its place.

Select a preset radio station

1
Press / to select a preset number.
Tip
•
Position the antenna as far as possible from TV, VCR
or other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antenna.

Set RDS clock

You can use time signal broadcast together with
the RDS signal to set the clock of the apparatus
automatically.
1
Tune to a RDS radio station that
transmits time signals.