Connect Video Cables - Philips HTS9810/59 User Manual

Connect video cables

This section describes how to connect this
DVD Home Theatre unit to your TV so to
enable viewing of disc play.
Select the best video connection that your TV
can support.
• Option 1: Connect to HDMI socket (for a
HDMI, DVI or HDCP-compliant TV).
Option 2:
• Connect to component video
socket (for a standard TV or Progressive
Scan TV).
Option 3:
• Connect to Video (CVBS) socket
(for a standard TV).
Note
•
You must connect this unit directly to a TV.
Option 1: Connect to HDMI socket
1
Before you connect, remove the rear
cover of the main unit by pushing it
upwards and outwards.
2
Connect a HDMI cable (supplied) from the
HDMI OUT on this unit to the HDMI IN
socket on your TV.
12 EN
HDMI
OUT
Note
•
The HDMI connector is only compatible with HDMI
compliant TVs and DVI-TVs.
Tip
•
To optimise the video output, see chapter 'Adjust
settings' > [ Video Setup ] > [ Advanced Picture ]
for details.
•
This unit is HDMI CEC compatible. It enables
connected TV/device to control each other over
HDMI, see chapter 'Activate EasyLink control' for
details.
•
Use a HDMI/DVI adaptor in case your TV has only
a DVI connection. An extra audio connection is
needed to complete this connection.
•
To route the audio from your TV to this DVD Home
Theatre unit, connect an audio cable from the audio
input on this unit to the audio output on your TV.
•
This type of connections provide best picture quality.
HDMI IN