Advertisement
1. Place part A (x2) leg base standing upright.
2. Insert part B (leg insert) into tube fitting of part A, pushing down firmly.
3. Insert safety caps (part C) into holes provided in part A.
4. Place the bench seats (part D x 2) between the two part A sections, fitting
into the slots provided. Press down firmly into position.
5. Place the table top (part E) across the center of the legs, making sure
each end is fitted into place.
6. Insert Part G into Part H.
7. Insert the combined parts G and H into the hole in the table top (part E).
8. Insert the umbrella through the hole of the table. Care must be taken
when opening or closing the umbrella to ensure that you do not trap or
pinch your fingers.
9. Always ensure that the product is fully erected and in its intended position
before use. Check that all parts are locked into place before children use
the product. Always use on a flat, firm surface.
Fig 1
Fig 4
Fig 2
Fig 5
Fig 3
Fig 6
Advertisement
