3. Technical Information
Main Body
Charger Cradle
Anesthesia Cartridge Holder
Injection Level
Total Injection Amount
Electrical Power Source
Use Condition
Free Warranty
Product cycle
6
Weight: 72g / Size: 150(W) x 22.4(D) x 30(H)mm / Material: ABS resin
Weight: 40g / Size: 71(W) x 62(D) x 46.5(H)mm / Material: ABS resin
Weight: 7g / Size: 7(Ø) x 86.3(H)mm / Material: PEI resin (able to sterilize)
Manual mode 3steps
1.8ml
Body
3.7V 470mAh Lithium Polymer (Protection circuit equipped)
Charger Cradle
Input: DC 12V/1A
Adapter
Input: AC 100~240V (50/60Hz) / Output: DC 12V/1A
Temperature: 10~40℃ / Relative humidity: Max. 80%
1 year
3 years
[Table-1]