Function; Buttons - Genoss iCT injection SE User Manual

6. Function

6.1 Buttons

Function
Power
Remove Air Bubble
Change
Injection
Velocity
Initialization
Explain Usage
Set / Release Sound
Control Volume Level
14
Press the injection button once (Shortly)
1step
2step
3step
Stop
Press the button (Long) once at the initialized state
Press both button at the same time for 3 more than seconds
Press the stop button once(shortly) under injection button
is pressed for more than 0.5 seconds
Operation
Press the power button (Shortly)
Press the button once (Shortly)
Once more (Shortly)
Once more (Shortly)
Press the button once (Shortly)
Press the button once (Long)
[Table-3]
Product Condition
Repeat the turn On/Off whenever press
the Power button
Remove air bubbles trapped in the needle
250sec/1.8ml (Low Speed)
120sec/1.8ml (Middle Speed)
50sec/1.8ml (High Speed)
Stop the injection
Initializing by hand-operated
Explain the usage in a voice
Repeat set up/release
Select 1~9 steps