Table of Contents
Advertisement
Quick Links
Betriebsanleitung/ Operating instructions
Wartungsanleitung/ Maintenance instructions
Ersatzteilliste/ Sparepart list
EFA Z27, EFA Z27S
Abviertelzange
Hook Cutter
Diese Anleitung unbedingt dem Bedienpersonal aushändigen!
Please forward these operating instructions to your operating
Schmid & Wezel
D 75433 Maulbronn
Wichtige Informationen:
Important Informations:
personell!
EFA Z27
EFA Z27S
Ausführung/ Execution
05.2004
Advertisement
Table of Contents
Related Manuals for EFA EFA Z27
Summary of Contents for EFA EFA Z27
- Page 1 Betriebsanleitung/ Operating instructions Wartungsanleitung/ Maintenance instructions Ersatzteilliste/ Sparepart list EFA Z27, EFA Z27S Abviertelzange Hook Cutter EFA Z27 EFA Z27S Wichtige Informationen: Diese Anleitung unbedingt dem Bedienpersonal aushändigen! Important Informations: Please forward these operating instructions to your operating personell! Schmid & Wezel Ausführung/ Execution...
-
Page 2: Table Of Contents
ONTENT 1. Operation, Scope of Supply, Accessories ................1 1.1 Symbols in this Manual ........................1 1.2 Intended Use ..........................1 1.3 Scope of Delivery ........................1 1.4 Accessories..........................1 2. Safety Precautions.........................2 2.1 General Safety Precautions ......................2 2.2 Conduct at the Place of Work .......................2 3. -
Page 3: Operation, Scope Of Supply, Accessories
Information symbol: As the pressure constitutes no significant factor for the design, the EFA hook cutter is not subject to the Texts marked with this symbol contain above directive. important information and useful tips. -
Page 4: Safety Precautions
When the cutter is not in use, store it so that there 8. Use only original EFA blades. Follow the instruc- is no risk of accidental contact with the blades as tions given under "Changing the blades". See Schmid &... -
Page 5: Switch Operation
they are sharp. 3.1.2 Hydraulic power unit The cutting process can be interrupted or repeated at any time. The cutting mechanism of the cutter functions hy- draulically. Connect the cutter to an operational hy- 3.3 Working with the Hook Cutter draulic power generator (see also the separate operating manual for the hydraulic power unit), and fill finely filtered hydraulic oil in the relevant... -
Page 6: Changing Blades
In order to avoid breakage, the blades must always order. be adjusted without clearance but with free move- Grease all sliding points and blades (36) with EFA ment. The adjustment is made using the locking special grease . washer (41) and hex. nut (42). -
Page 7: Maintenance
5. Maintenance If the cutter cannot be pulled out, the spring balanc- er is jammed and a readjustment is necessary: Malfunctions may occur during operation, but these Turn the screw in PLUS direction until the cutter are generally relatively simple to remedy. Table 1: can be pulled out and start the fine adjustment "Troubleshooting"... -
Page 8: Cleaning And Maintenance
Rinse the After every cleaning, grease the pivot and sliding machine with clear water after disinfection. points and the blades lightly with EFA Special Grease. Do not use aggressive solvents! Do not use steam or high-pressure 6.2.2 Blade clearance... -
Page 9: Repair By After-Sales Service
At the end of their useful service life, return old units available grinders. to the parent company for disposal. Do not use force as parts could be damaged! Only use original EFA spare parts! 6.4 Repair by After-Sales Service Disconnect the machine from the... -
Page 10: Annex
A. Annex A.1 Technical data EFA Z27 EFA Z27S Operating pressure 200 bar 200 bar Closing force 26.5 kN 26.5 kN Closing time of the jaws 1.5 s 1.5 s Cutter opening 260 mm 186 mm Sound pressure level (EN ISO 11688-1) <... - Page 11 Cutter body 003 008 536 Hexagon socket head screw 002 000 275 Cover (right) 003 008 741 Cover (left) 003 008 742 Hex. head bolt 001 325 921 Bracket 003 008 526 Spring washer 001 317 003 Hex. head bolt 001 325 908 Blade complete (each with 1 piece 37 + 007 008 542...
-
Page 12: Cutter Sizes
O-ring (inner) 001 312 649 Back-up ring (inner) 001 317 801 O-ring (outer) 001 312 670 Multi-strand cable 001 610 605 Cable gland 001 325 525 Housing 003 005 068 Hex. head bolt 002 000 234 O-ring 001 312 656 Male fitting 001 610 601 Bracket... -
Page 13: Exploded Diagram, Z27/ Z27S
A.4 Exploded diagram, Z27/ Z27S Schmid & Wezel Seite / Page Ausführung / Execution D-75433 Maulbronn 11/ 12 05.2004... -
Page 14: Declaration Of Conformity
The validity of this declaration expires when a modification to the machine is made without being coordinated with us. Bezeichnung der Maschine: Zangen EFA Z ..: 05,06,07,08,10,12,,13 14,27,27S, 28,28S, 078, 079, 080,085, 090, 140,ZR27 Antrieb...
Need help?
Do you have a question about the EFA Z27 and is the answer not in the manual?
Questions and answers