Canon BJC-55 Service Bulletin page 11

COMP. SYSTEMS
5-3. DIRECT PRINTING FUNCTION OF THE IMAGE FROM DIGITAL CAMERAS
(BJ M40 only)
<Difference from the BJC-50/50v>
The new adoption of IrTranP has enabled the printing of data sent directly from
digital cameras compliant to IrTranP standards, not through the host computer, but
via IrDA communication.
Specifications
Data communication form:
Input image size:
Input image capacity:
Output image size:
Paper size:
Operation
<Image printing>
If the printer is powered on and receives print data from digital camera, the printing
operation will start.
<Reprinting>
The image data is also maintained in memory after printing, and will not be abandoned
until new image data is received from the digital camera, or print data is input from the
host computer. Reprinting of data is possible by pressing the RESUME button (and
releasing before the beeper sounds).
<Printing cancellation>
During the printing of image data, printing is cancelled by pressing the RESUME button
until the beeper sounds once, then releasing. In this case paper is delivered. The
remaining data halfway through printing is abandoned. (As the image data has been
maintained, it is possible to reprint the data, without resending the data from the digital
camera.)
<Printing position definition>
To select the printing position, press the POWER button and Cartridge Replacement
button simultaneously when the power is on, and release the buttons after the beeper
sounds the number of times applicable to the printing position to be selected. This setting
returns to the default (Landscape) by powering off. The number of beeps is as follows:
Once:
Twice:
3 times:
4 times:
5 times:
IrTranP standards compatible
640 x 460 pixels
128 Kbyte or less
Landscape:
Portrait:
Seal printing: 19 x 26 mm x 16 images
Postcard
Portrait
16-image seal printing
Photo glossy card landscape
Photo glossy card portrait
Setting completed.
- 11 -
90 x 68 mm
77 x 103 mm
PRNT-896