IDS Ingegneria Dei Sistemi S.p.A.
RIS Hi-Mod / DUALF-400-900 - Installation Guide
and User Manual
Rudder
Connection
Pipes
Antenna
cables
Non-
wheeled
frame
Fig. 1.13 – Equipment provided for the two antennas configuration
1.2.1 Assemblage instructions
First you have to set the rudder in its two antennas setting. The rudder has two free
bars and four knobs (Fig. 1.2). The bigger ones must be screwed in vertically to
block the free bars in place while the little ones can be screwed in two different
position: if placed on the inside part of the frame you will get the mono or three
antenna configuration (Fig. 1.3); if placed on the external part of the frame you
will get the two or four antenna configuration (Fig. 1.14).
Wheeled
frames
Fig. 1.14 – Two antennas rudder configuration
N. doc.: MN/2009/056 - Rev. 1.1
/
23
44
Antennas
Battery &
LAN cables
DAD unit &
Batteries