Assemblage Instructions - IDS RIS Hi-Mod Installation Manual And User's Manual

IDS Ingegneria Dei Sistemi S.p.A.
RIS Hi-Mod / DUALF-400-900 - Installation Guide
and User Manual
Rudder
Antenna
cables
Batteries &
DAD
Non-wheeled
frames
Fig. 1.21 - Equipment provided for the three antennas configuration

1.3.1 Assemblage instructions

First you must set the system in its mono antenna configuration (see Par 1.1.1),
then you have to build the frames for the antennas on the side. Equipment needed
for the side frames is shown in Fig. 1.22.
Fig. 1.22 – Side antenna frames parts
/
28 44
N. doc.: MN/2009/056 - Rev. 1.1
Wheeled
frames
Antennas
Battery &
LAN cables
Connection
pipes