Page 1
Before using your MS16 Scale, please install the 4 AA batteries supplied with the scale. These batteries need to be installed into the battery compartment found on the underside of the scale. The MS16 Scale comes with 4 self-leveling feet. For best accuracy, place the scale on a safe, hard, flat, level surface before turning on.
Page 2
If the MEM key was pressed, press it again to recall the last stable weight reading. Scale will automatically turn off after 5 minutes if not used. Calibration instructions for this scale, if needed, can be found at: http://www.brecknellscales.com/doc.html Brecknell USA Brecknell UK 1000 Armstrong Dr. Foundry lane,...
Need help?
Do you have a question about the MS16 and is the answer not in the manual?
Questions and answers