Advertisement

Available languages

Available languages

EU Declaration of Conformity
Manufacturer
Type
Corresponds to the requirements of the following EC directives
Electro Magnetic Compatibility Directive
Low Voltage Directive
The application harmonized standards are:
A copy of the original signed declaration for this instrument is available
from the below UK address:
Electromagnetic Compatibility Statement for North America
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet different from that to which the receiver is
connected.
Consult the dealer or an experienced radio / TV technician for help.
IN-0787
Brecknell USA
1000 Armstrong Drive
Fairmont, MN 56031
Tel: 507-238-8702
Fax: 507-238-8271
Email: sales@brecknellscales.com
www.brecknellscales.com
Avery Weigh-Tronix
Brecknell MS20
2014/30/EU
2014/35/EU
EN60950-1:2006+A1:2009
EN61000-6-1:2007
EN61000-6-3:2007
Brecknell UK
Foundry Lane,
Smethwick, West Midlands
England B66 2LP
Tel: +44 (0) 845 246 6717
Fax: +44 (0) 845 246 6718
Email:
sales@brecknellscales.co.uk
www.brecknellscales.co.uk
USER'S MANUAL
Model MS-20

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MS-20 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Brecknell MS-20

  • Page 1 Increase the separation between the equipment and the receiver. Connect the equipment to an outlet different from that to which the receiver is connected. Model MS-20 Consult the dealer or an experienced radio / TV technician for help. IN-0787 Brecknell USA...
  • Page 2 8) Display will show “CAL” and then “20.00 kg”. POWER SUPPLY  9) Remove the weight from the scale and the calibration is finished. The MS-20 uses 9V alkaline battery or ERROR MESSAGES  9V 100mA AC adapter. CAUTION : always connect the AC 1.
  • Page 3 Agrandir la séparation entre l’équipement et le récepteur. MANUEL DE L’UTILISATEUR Brancher l’équipement sur une autre prise non utilisée par le récepteur. Consulter le vendeur ou un technicien expérimenté en radio/téléviseur pour obtenir de l’aide. Modèle MS-20 Brecknell USA Brecknell UK 1000 Armstrong Drive...
  • Page 4  8) L’écran affiche « CAL » (CALIBRAGE), puis « 20.00 kg. 9) Retirer le poids de la balance et le calibrage est terminé. Le modèle MS-20 utilise une batterie alcaline de 9 V ou un adaptateur c.a. MESSAGES D’ERREUR ...

Table of Contents