Fig. 1 Station Drawing - Whelen Engineering Company WPS-2900 Series Installation Manual

Fig. 1: Sample Station Drawing (AC Powered Battery Charger)
NOTE: ANTENNA INSTALLATION
MUST BE IN COMPLIANCE WITH
ALL FCC REGULATIONS.
4 AWG (MINIMUM)
SOLID COPPER WIRE
ANTENNA GROUND.*
NOTE: AVOID SHARP BENDS
IN THE GROUND WIRES
(4) 10' SECTIONS OF
1" (1.25" IF EQUIPPED
WITH OPTIONAL STROBE)
RIGID STEEL
CONDUIT.*
4 AWG (MINIMUM)
SOLID COPPER WIRE
CABINET GROUND.*
4 AWG (MINIMUM)
SOLID COPPER WIRE
SPEAKER/ANTENNA
GROUND.*
GROUND WIRES TIED
TO GROUND ROD
PER SPEC. OR LOCAL
CODE.
POLE SETTING DEPTH
PER LOCAL CODES
32.5"
Optional
Strobe
HEIGHT
68.4"
ALUMINUM TO
COPPER GROUND
LUG.
A B C
Model
Number
WPS-2900-1
WPS-2900-2
WPS-2900-3
WPS-2900-4
WPS-2900-5 (shown)
WPS-2900-6
WPS-2900-6A
WPS-2900-7
WPS-2900-8
WPS-2900-9
WPS-2900-10
1 POINT RACK, SPOOL
INSULATOR AND
SERVICE CLAMP FOR
AC SUPPLY.*
DRIP LOOP
WEATHER HEAD FOR
SERVICE ENTRANCE.*
2 POLE, 15A (MIN.), NEMA #3R
A/C DISCONNECT.*
A) .75 DIA. CONDUIT
A.C. POWER INPUT
B) .75 DIA. CONDUIT-
ANTENNA CABLE
C) 1.00 DIA. CONDUIT-
SPEAKER, DRIVERS
FLEX CONDUIT *
(Metal Bonded Type-Only)
ALUMINUM TO
COPPER GROUND
LUG.
10'-12' (TYP)
GROUND RODS* PER SPEC, OR
GROUNDING PER LOCAL CODES.
* CUSTOMER SUPPLIED
Page 4
Speaker Height
(inches)
18.8
31.2
43.6
56.0
68.4
80.8
80.8
93.2
105.6
118.0
130.4
50' (TYP)