En Instructions For Use / Assembly Instructions - Hansgrohe Axor Citterio 39850 Series Instructions For Use/Assembly Instructions


Safety Notes
Gloves should be worn during installation to prevent

crushing and cutting injuries.
The hot and cold supplies must be of equal pressu-

res.
Installation Instructions
• The fitting must be installed, flushed and tested after
the valid norms!
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous flow
heaters if the flow pressure is at least 0,15 MPa.
4
English
Symbol description
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
max. 80°C
65°C
Assembly see page 31
Do not use silicone containing acetic acid!
To adjust the hot water limiter on single lever
mixers, please see page 35. No adjustment
is necessary when using a continuous flow
water heater.
Dimensions (see page 33)
Flow diagram (see page 33)
Operation (see page 34)
Cleaning
see enclosed brochure.
Spare parts (see page 36)
XXX = Colors
000 = chrome plated
800 = stainless steel optic
Test certificate (see page 34)