Video Setup - Philips HTS8140/93 User Manual

Tips
•
See chapter 'Get Started - Start Ambisound setup'
for detailed information.
[ HDMI Audio ]
When you connect this unit and TV with
HDMI cable, select the audio output
setting for this connection.
• [ On ] – the sound is output through
both your TV and this speaker system.
If the audio format on the disc is not
supported, it will be downmixed to
two-channel sound (linear-PCM).
• [ Off ] – disable audio output from
your TV. The sound is only output
through this speaker system.
[ Night Mode ]
Make loud sound level softer and soft
sound level louder so that you can watch
the DVD movies at a low volume, without
disturbing others.
• [ On ] – for quiet viewing at night
(DVDs only).
• [ Off ] – enjoy surround sound with a
full dynamic range.

Video setup

1
Press OPTIONS.
[ General Setup ] menu is displayed.
2
Press V to select
press B.
3
Select an option, then press OK.
Video Setup
TV Type
TV Display
Picture Settings
Advanced Picture
Closed Caption
Progressive
• See the explanations of the above
options in the following pages.
4
Select a setting, then press OK.
• To return to the previous menu, press
BACK.
• To exit the menu, press OPTIONS.
[ Video Setup ], then
EN 41