Video Setup - Philips HTS6520 User Manual

[HDMI Audio]
Selects the HDMI audio setting when you
connect this Home Theater System and the
TV with a HDMI cable.
[On] – Allows audio output through the
•
TV and the speaker system. If the audio
format on the disc is not supported, it
will be downmixed to two-channel sound
(linear-PCM).
[Off] – Disables audio output from the
•
TV. The sound is only output through the
speaker system.
[Night Mode]
Makes loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
[On] – Enjoys quiet viewing at night.
•
[Off] – Enjoys surround sound with a full
•
dynamic range.
Note
•
Applicable only to Dolby Digital encoded discs.
EN
40

Video setup

Video Setup
TV System
TV Display
Picture Setting
HDMI Setup
Closed Caption
Progressive
1
Press SETUP .
» [General Setup] menu is displayed.
2
to select [Video Setup] , then
Press
press .
3
Select an option, then press OK
4
Select a setting, then press OK .
• To return to the previous menu,
BACK .
press
• To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
[TV System]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
[PAL] – For PAL-system TV.
•
• [NTSC] – For NTSC-system TV.
• [Multi] – For TV that is compatible with
both PAL and NTSC.
SETUP .