Note
•
Applicable only to Dolby Digital encoded discs.
Video setup
Video Setup
TV System
TV Display
Progressive
Picture Settings
1
Press
SETUP.
» [General Setup] menu is displayed.
2
Press
to select [Video Setup], then
press .
3
Select an option, then press OK
4
Select a setting, then press OK.
•
To return to the previous menu,
press
BACK.
•
To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
[TV System]
Changes this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
•
[PAL] – For PAL-system TV.
•
[NTSC] – For NTSC-system TV.
•
[Multi] – For TV that is compatible with
both PAL and NTSC.
28
EN
[TV Display]
Selects one of the following display formats:
4:3 Pan Scan (PS)
•
•
•
[Progressive]
If the TV supports progressive scan output,
you can turn on the progressive scan mode to
enhance the picture quality. Video connection
through Component Video is required.
•
•
•
There is more detailed description available
(see 'Get started' > 'Turn on Progressive
Scan').
SETUP.
[Picture Settings]
Selects a predefi ned set of picture color
settings or customize the personal setting.
•
•
•
•
4:3 Letter Box (LB)
[4:3 Pan Scan] – For 4:3 screen TV: full-
height display with the trimmed sides.
[4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars on
the top and bottom of the screen.
[16:9 Wide Screen] – For wide-screen
TV: display ratio 16:9.
[On] – Turns on progressive scan mode.
[Off] – Disables progressive scan mode.
Tip
[Standard] – Original color setting.
[Bright] – Vibrant color setting.
[Soft] – Warm color setting.
[Personal] – Customizes the color setting.
Set the level of brightness, contrast,
sharpness/tint and color saturation, then
press OK.
16:9 (Wide Screen)