Philips HTS8140/93 User Manual page 13

Option 1: Connect to HDMI socket
HDMI
OUT
1
Connect a HDMI cable (supplied) from the
HDMI OUT on this unit to the HDMI IN
socket on your TV.
Note
•
The HDMI connector is only compatible with HDMI
compliant TVs and DVI-TVs.
Tips
•
To optimise the video output, see chapter 'Adjust
settings' > [ Video Setup ] > [ Advance Picture ]
for details.
•
This unit is HDMI CEC compatible. It enables
connected TV/device to control each other over
HDMI, see chapter 'Activate EasyLink control' for
details.
•
Use a HDMI/DVI adaptor in case your TV has only
a DVI connection. An extra audio connection is
needed to complete this connection.
•
To route the audio from your TV to this DVD Home
Theatre unit, connect an audio cable from the audio
input on this unit to the audio output on your TV.
•
This type of connections provide best picture quality.
Option 2: Connect to component
video socket
HDMI IN
1
Connect the component video cables (not
supplied) from the Y P
unit to the component video input sockets
on your TV.
•
•
The component video input socket on your TV may
be labelled as Y Pb/Cb Pr/Cr or YUV.
•
This type of connections provide good picture
quality.
Y Pb Pr
COMPONENT
VIDEO OUT
P sockets on this
B R
If a progressive scan TV is used, you
may turn on the progressive scan mode
(see chapter 'Turn on Progressive Scan'
for details).
Tips
EN 13