Table of Contents
Advertisement
KSM-1
English
How to use this manual
If you have no specialist technical training, this manual gives step-by-
step instructions for safe and correct assembly of the kit or fitting of the
ready-built module, and operation. Before you start, we advise you to
read the whole manual, particularly the chapter on safety instructions
and the FAQ chapter. You will then know where to take care and how
to prevent mistakes which take a lot of effort to correct.
Keep this manual safely so that you can solve problems in the future. If
you pass the kit on to another person, please pass on the manual with it.
Intended use
!
Caution:
Integrated circuits are very sensitive to static electricity. Do not touch
components without first discharging yourself. Touching a radiator or
other grounded metal part will discharge you.
The kit or the ready-built module can be assembled or fitted using this
manual. The ready-built module is designed for use in digital model railways
with a two-rail system. The loop Module detects short circuits which may
occur when a locomotive gets into the supervised section. In this event it
changes the polarity within the loop thus neutralizes the short circuit.
The ready-built module is designed for use in model railways. It delays
electrical switching impulses of a given length for an optional period of
time of up to 60 seconds. The module can be used e.g. for the delayed
initiation of solenoid accessories (e.g. semaphore signals, points,
bistable relays).
The kit and the ready-built module are not suitable for children under
the age of 14.
Reading, understanding and following the instructions in this manual
are mandatory for the user.
Any other use of the kit is inappropriate and invalidates any guarantees.
Page 19
Advertisement
Table of Contents
